Glass PVD Coating Machine

AF coating machine is a technology used to deposit nanochemical materials on the surface of glass. Its main purpose is to improve the waterproof, oil-proof, scratch-proof, anti-fingerprint and anti-pollution properties of the glass.
AF coating technology, the full name of which is Anti-Fingerprint coating technology, is mainly used to improve the surface properties of glass or organic glass (such as PC, PMMA, PET, etc.). The implementation of this technology relies on vacuum evaporation coating or magnetron sputtering coating.
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Product Introduction

AF coating machine is a technology used to deposit nanochemical materials on the surface of glass. Its main purpose is to improve the waterproof, oil-proof, scratch-proof, anti-fingerprint and anti-pollution properties of the glass.

AF coating technology, the full name of which is Anti-Fingerprint coating technology, is mainly used to improve the surface properties of glass or organic glass (such as PC, PMMA, PET, etc.). The implementation of this technology relies on vacuum evaporation coating or magnetron sputtering coating.

Product Advantage

  • The core of AF coating technology is to reduce the tension on the glass surface and reduce the contact area between dust and the glass surface, thereby achieving the effects of water repellency, oil resistance, and fingerprint resistance. This technology not only improves the aesthetics and cleanability of the glass, but also enhances its durability, allowing the video glass panel to maintain a smooth and bright effect for a long time.

  • Vacuum evaporation coating method: The material is vaporized by heating, and the vapor condenses on the glass surface to form a thin film. This method is applicable to a variety of materials, including high and low refractive index materials, and is coated by cross-stacking to achieve the purpose of anti-reflection.

  • Magnetic sputtering coating method: Gas discharge is used to bombard the target material with particles in the gas or vapor, so that the target atoms or molecules are deposited on the substrate to form a thin film. This method is also applicable to improving the light transmittance of glass and reducing the reflectivity.

Technical Parameters

ModelLY1820  LY2020  LY2320
Chamber size1800*2000mm, 2000*2000mm, 2300*2000mm
Function descriptionAF coating machine is a special coating machine that coats glass with superimposed coatings to resist friction, fingerprints and waterproofing.
Coating colorgold, champagne gold, gun black, dark black, rose gold, blue, green, etc.
Application fieldsGlass
Vacuum structureVertical double door
U imate vacuum(Pa)8.0x10-4Pa
Heater power95KW,120KW

Product Uses

The startup steps of the vacuum coating machine involve several key operations to ensure that the equipment starts up safely and effectively and enters the working state. ‌The following are the specific steps: ‌

  • Check the equipment status: ‌First, ‌Make sure that the various components of the vacuum coating machine are in normal condition and without faults. ‌ Select the appropriate film material and process parameters as needed. ‌

  • Power connection: ‌Make the correct power connection according to the machine manual. ‌ This includes turning on the main power switch to ensure that the equipment is powered. ‌

  • Start the vacuum pump and exhaust device: ‌Check whether the vacuum pump and exhaust device are operating normally, which is a key step to achieve the vacuum degree required for work.

  • Set parameters and preheat: Start the control panel, set relevant parameters and preheat.  This step ensures that the equipment operates in the best condition.

  • Specific operations: Depending on the different vacuum coating machine models and process requirements, other specific operations may also be included, such as turning on the water pump,  gas source,‌ starting the maintenance pump, vacuum gauge power, and starting the mechanical pump,‌ pre-exhaust, etc. These steps help to establish and maintain the vacuum environment required for work.

  • Safety precautions: During operation, personal protective measures should be taken, and work clothes, gloves and protective glasses should be worn to ensure the safety of operators‌

Through the above steps, the vacuum coating machine can be safely and effectively started and put into working state. Each step is to achieve or maintain the required vacuum degree, so as to ensure the quality and efficiency of the coating process.

Product Operate Guide

The startup steps of the vacuum coating machine involve several key operations to ensure that the equipment starts up safely and effectively and enters the working state. ‌ The following are the specific steps: ‌

  • Check the equipment status: ‌First, ‌ Make sure that the various components of the vacuum coating machine are in normal condition and without faults. ‌ Select the appropriate film material and process parameters as needed. ‌

  • Power connection: ‌Make the correct power connection according to the machine manual. ‌ This includes turning on the main power switch to ensure that the equipment is powered. ‌

  • Start the vacuum pump and exhaust device: ‌Check whether the vacuum pump and exhaust device are operating normally, which is a key step to achieve the vacuum degree required for work.

  • Set parameters and preheat: Start the control panel, set relevant parameters and preheat.  This step ensures that the equipment operates in the best condition.

  • Specific operations: Depending on the different vacuum coating machine models and process requirements, other specific operations may also be included, such as turning on the water pump,  gas source,‌ starting the maintenance pump, vacuum gauge power, and starting the mechanical pump,‌ pre-exhaust, etc. These steps help to establish and maintain the vacuum environment required for work.

  • Safety precautions: During operation, personal protective measures should be taken, and work clothes, gloves and protective glasses should be worn to ensure the safety of operators‌.

Through the above steps, the vacuum coating machine can be safely and effectively started and put into working state. Each step is to achieve or maintain the required vacuum degree, so as to ensure the quality and efficiency of the coating process.

FAQ

Q: How long does the training take?

A: About 7-10 days.


Q: How long is the delivery period?

A: 60 working days.


Q: What's your afer-sales service?

A: We provide free installation and training services, as well as technical support.


Q: What payment methods do you accept?

A: We accept T/T,LC.

Previous: 
Next: 

Join Our Mailing List

Quick Links

Product Category

Solutions

Contact Us

WhatsApp: +8613332660726
Phone: +86-13332660726
Add: NO.449,Dalingshan Section, Guangchang Road, Dalingshan Town, Dongguan City,Guangdong Province
Copyright © 2024 Dongguan Lianye Vacuum Technology Co., Ltd. All Rights Reserved I Sitemap I Privacy Policy