You are here: Home / Products / PVD Coating Machine / 3D Series Vacuum Coating Machine / 3D Series Vacuum Coating Machine

3D Series Vacuum Coating Machine

Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Product Introduction

Equipment features: The equipment has the advantages of quick pumping, strict control of process temperature, fast deposition, and good process repeatability.

Function description: 3D coating machine is a machine that can coat transparent materials such as glass and acrylic.Special coating machine for composite overlay coating.The coated workpiece reflects different 3D colorful effects under the light.

Product Advantage

  • A thin layer of film can make ordinary glass bottles shine.

  • 3D vacuum coating equipment, with its highly controllable thickness of deposited films, excellent uniformity and three-dimensional conformality, has broad application potential in the fields of semiconductors, optics, component coating, new energy, etc.

  • It adopts thermal evaporation or magnetron sputtering, which does not require the use of organic solvents and water, saving a lot of water resources.

Technical Parameters

ModelLY1250   LY1600  LY1811
Chamber sizeCustomized according to customer needs.
Function description3D coating machine is a machine that can coat transparent materials such as glass and acrylic. Special coating machine for composite overlay coating.The coated workpiece reflects different 3D colorful effects under the light.
Equipment features
The equipment has the advantages of quick pumping, strict control of process temperature, fast deposition, and good process repeatability.
Application fieldsGlass, Acrylic
Vacuum structureVertical double door
Ultimate vacuum(Pa)8.0x10-4Pa
Heater power9KW

Product Uses

Widely used in Glass and Acrylic.

3D coating machine is a machine that can coat transparent materials such as glass and acrylic.Special coating machine for composite overlay coating.The coated workpiece reflects different 3D colorful effects under the light.

Product Operate Guide

The startup steps of the vacuum coating machine involve several key operations to ensure that the equipment starts up safely and effectively and enters the working state. ‌The following are the specific steps: ‌

  • Check the equipment status: ‌First, ‌Make sure that the various components of the vacuum coating machine are in normal condition and without faults. ‌Select the appropriate film material and process parameters as needed. ‌

  • Power connection: Make the correct power connection according to the machine manual. This includes turning on the main power switch to ensure that the equipment is powered. ‌

  • Start the vacuum pump and exhaust device: Check whether the vacuum pump and exhaust device are operating normally, which is a key step to achieve the vacuum degree required for work.

  • Set parameters and preheat: Start the control panel, set relevant parameters and preheat. This step ensures that the equipment operates in the best condition.

  • Specific operations: Depending on the different vacuum coating machine models and process requirements, other specific operations may also be included, such as turning on the water pump,  gas source,‌ starting the maintenance pump, vacuum gauge power, and starting the mechanical pump,‌ pre-exhaust, etc. These steps help to establish and maintain the vacuum environment required for work.

  • Safety precautions: During operation, personal protective measures should be taken, and work clothes, gloves and protective glasses should be worn to ensure the safety of operators‌

Through the above steps, the vacuum coating machine can be safely and effectively started and put into working state. Each step is to achieve or maintain the required vacuum degree, so as to ensure the quality and efficiency of the coating process.

FAQ

Q: How long does the training take?

A: About 7-10 days.


Q: How long is the delivery period?

A: 60 working days.


Q: What's your afer-sales service?

A: We provide free installation and training services, as well as technical support.


Q: What payment methods do you accept?

A: We accept T/T,LC.

Previous: 
Next: 

Related Products

Join Our Mailing List

Quick Links

Product Category

Solutions

Contact Us

WhatsApp: +8613332660726
Phone: +86-13332660726
Add: NO.449,Dalingshan Section, Guangchang Road, Dalingshan Town, Dongguan City,Guangdong Province
Copyright © 2024 Dongguan Lianye Vacuum Technology Co., Ltd. All Rights Reserved I Sitemap I Privacy Policy